CG-SRIII Series [End of sale]

Specifications

 CG-60SRIIICG-100SRIIICG-130SRIII
Acceptable sheet width 90 - 740 mm
(3.5 - 29.1")
90 - 1,250 mm
(3.5 - 49.2")
90 - 1,550 mm
(3.5 - 61.0")
Effective cutting area *1 606 mm × 51 M (23.9" x 167.3') 1,070 mm × 51 M (42.1" x 167.3') 1,370 mm × 51 M (53.9" x 167.3')
Maximum speed Cutting: 70 cm/s, Moving: 100 cm/s
Adjustable speed range 1 - 10 cm/s (1 cm/s step adjustment): 0.4 - 3.9"/s (0.4"/s step adjustment)
1 - 70 cm/s (5 cm/s step adjustment): 0.4 - 27.6"/s (2.0"/s step adjustment)
Mechanical resolution X direction: 2.5 μm、Y direction: 5 μm
Command resolution 25 μm or 10μm( MGL-IIc) / 100 μm, 50 μm( MGL-Ic1)
Repeatability *2 ± 0.2 mm / 2 M
Effective Repeatability *3 586 mm × 2 M 1,050 mm × 2M 1,350 mm × 2M
Maximum pressure 500g
Range
of down pressure
Cutter 10 - 20 g(2 g step), 20 - 100 g(5 g step), 100 - 500g(10g step)
Pen 10 - 20 g(2 g step), 20 - 100 g(5 g step), 100 - 150g(10 g step)
Acceptable sheet *3 Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet
Acceptable tool *4 Cutter, Ball-point pen
Type of command MGL-IIC / MGL-Ic1
Interface USB2.0、RS-232C、Ethernet
Receiver buffer size 27 MB Standard (When sorting, 17 MB)
Operational environment 5 - 35 degC (41 - 95 degF), 35 - 75 % (Rh), Non-condensation
Power requirement AC 100 V - 240 V, 145 VA or less
Dimensions(W×D×H) 1,030 × 430 × 335 mm
(40.6 × 16.9 × 13.2")
1,030 × 430 × 1,185 mm *5
(40.6 × 16.9 × 46.7") *5
1,530 × 580 × 1,150 mm
(60.2 × 22.8 × 45.3")
1,830 × 580 × 1,150 mm
(72.0 × 22.8 × 45.3")
Weight 24kg (52.9 lb.) 41kg (90.4 lb.) 46kg (101.4 lb.)
Stand Optional equipment Standard equipment Standard equipment

*1: Maximum sheet feeding length differs depending on the software.
*2: Except for media expansion and contraction due to temperature.
*3: Operated with Mimaki specified media, cutter and cutting conditions.
Thickness of rubber and its cutting speed are limited. Guaranteed accuracy environment: Temperature 12 - 25 degC (53.6 - 77 degF), Humidity 45-65%
*4: Our dedicated cutter blade and specified commercial ball-point pens are available. (Drawing quality of ball-point pen is not warranted)
*5: When equipped with the optional stand (OPT-0231)

  • Some of the screens and printing samples in this website are artificial renderings.
  • Specifications are subject to change without notice.
  • All trademarks or registered trademarks are the property of the respective owners.

CG-SRIII Series Catalog (1.3MB)

Model

CG-60SRIII Effective cut width: 606 mm (23.8")
CG-100SRIII Effective cut width: 1,070 mm (42.1")
CG-130SRIII Effective cut width: 1,370 mm (53.9")

Related products

Return to Content

PAGETOP