Specifications

HOME  >>  Product Lineup  >>  CG-FXII Series  >>  Specifications

Specifications

 CG-75FXIICG-130FXIICG-160FXII
Acceptable sheet width 90mm~1,040mm (3.54"~40.9") 90mm~1,580mm (3.54"~62.0") 90mm~1,880mm (3.54”~74”)
Acceptable roll sheet Outer less than φ200mm , Roll weight less than 18kg Outer less than φ200mm Roll weight less than 22kg
Effective cutting area*1 760mm x 51m(29.9" x 167') 1,300mm x 51m(51.2" x 167') 1,600mm×51m(62.9”×167’)
Maximum auto cutting width*2 870mm (34.2”) 1,425mm (56.1”) 1,720mm (67.7”)
Maximum cutting speed 100cm/s (39.3"/s)
Maximum moving speed 140cm/s (55"/s)
Adjustable speed range*3 1-10cm/s : 1cm step adjustment
(0.39"-3.94"/s : 0.39" step adjustment)
10-50cm/s : 5cm step adjustment
(3.94"-19.68"/s : 2" step adjustment)
50-100cm/s : 10cm step adjustment
(19.68"-39.37" : 3.94" step adjustment)
Mechanical resolution 5µm(0.0002")
Command resolution 25µm or 10µm(0.001" or 0.0004")-MGL-IIc
Repeatability ±0.2mm (Excluding shrinkage /
expansion caused by the film temperature)
Pen pressure 400g
Range of down pressureCutter 10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
Pouncing 10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
Pen 10~20g(2g step), 20~100g(5g step), 100~150g(10g step)
Acceptable sheet*4 Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl
Reflective sheet
Acceptable sheet for pouncing*5 Paper thickness: 0.06~0.13mm (0.0024"~0.005")
Applicable tools*6 Cutter, Water based ball-point pen,
Oil based ball-point pen, Pouncing tool
Type of command MGL-IIc
Interface RS-232C,USB
Receiver buffer size 30MB Standard (20MB when in sorting)
OperationalTemperature 5~35°C (41~95°F)
Humidity 35~75%(Rh) Non-condensation
Power requirement AC100V~240V
Power consumption 130VA or less
Dimensions (WxDxH) 1,285mm(50.5")x
700mm(27.5")x
1,217mm(47.9")
1,825mm(71.8")x
700mm(27.5")x
1,217mm(47.9")
2,125mm(83.6")x
700mm(27.5")x
1,217mm(47.9")
Weight (with stands) 50kg(110 lbs.) 60kg(132 lbs.) 69kg(152 lbs.)

All trademarks or registered trademarks are the property of the respective owners. Specifications are subject to change without notice.

  • *1: Maximum sheet feeding length differs depending on the software.
  • *2:Sheet width to cut off from the roll.
  • *3:Restricted sheet width.
  • *4:Provided that the blade specific to fluorescent type vinyl (SPB-0007)and the blade specific to reflective sheet (SPB-0006)are used.
  • *5:Pouncing tool intended specifically for pouncing shall be used.
  • *6:The goods on the market are φ8~φ9 Pen. No guaranty with accuracy, and image quality.

▲ PAGETOP