HOME  >>  Product Lineup  >>  CF2 Series  >>  Specifications


(Sensor model)
1,170mm(46.1") 1,470mm(57.9") 1,770mm(69.7")
(No sensor model)
1,200mm(47.2") 1,500mm(59.1") 1,800mm(70.9")
Y 900mm(35.4") 1,200mm(47.2")
Motorization X,Y,Z,θ 4 axes DC software servo
Maximum plotting speed 50cm(19.7") / s
Maximum acceleration 0.5G
Mechanical resolution X:0.00234mm(0.00009") Y:0.003125mm(0.0001") θ:0.05625
Command resolution 0.025mm(0.001") / 0.01mm(0.0004")
(changeable from operation panel)
accuracy *1
Repetition accuracy ±0.1mm(0.004")
Distance accuracy ±0.1mm(0.004") or ±0.1% whichever is greater
Origin repetition accuracy ±0.1mm(0.004")
Maximum thickness of set work T / TD:25mm(1") RT / RC:20mm(0.8")
Work fixation Air suction by a blower
Receiver buffer size 1MB
Command MGL-IIc3(Support MGL-IIc) *2
Interface RS-232C
DimensionWidth 1,760mm(69.3")
or less
or less
or less
Depth 1,600mm(63.0")
or less
1900mm(74.8") or less
Height 1,100mm(43.3") or less
Weight 140kg(308lbs) 165kg(364lbs) 180kg(397lbs)
Operation environment Temperaturet : 5-40ºC
Humidityt : 35-75%(Rh)No condensation
Power requirement Main Unitt : 50/60Hz AC100/120/220/240V(tap changing)
Blowert : Stated separately
Power consumption Main Unit : 300VA Blowert : Stated separately
  • *1 Accuracy written with a pen where the load is almost non-existent. Guaranteed temperature range is 20 to 25 ºC.
  • *2 A command based on HP-GL.

Materials that can be processed

Possible to cut with standard accessories
Possible to cut with the use of optional items

Corrugated fiberboard(E to B corrugation)*      
Corrugated fiberboard(AB corrugation)*        
Coated board for packaging*      
Vinyl chloride for clear package*      
Plastic corrugated fiberboard      
Vinyl chloride sheet for signboard
Soft vinyl chloride(0.5 to 10mm)      
Reflecting sheet
Sand-blast rubber
Industrial sheet rubber(3mm or less)
Industrial sheet rubber(0.5 to 10 mm)      
Pattern Happort
Teflon(1.0 to 5.0mm)    
Resin belt. (5.0mm or less)      
Various foam(20mm or less)        
  • Note) As the property of the media may vary depending on the material manufacturers, the above data is just a guide. Make sure to perform your own testing.
  • Note) *shows material to which drawing of the ruled line is possible.