HOME  >>  Product Lineup  >>  UJF-605CII  >>  Specifications


Print head Piezo-electric drop-on demand
Resolution 600dpi×600dpi, 1,200dpi×1,200dpi, 1,200dpi×2,400dpi
Ink Exclusive UV curable ink (7 colors:Y,M,C,K,Lm,Lc,W) + Clear
440cc/cartridge for each color
Max. Printing WidthWidth 600mm (23.6")
Repeatability 500mm (19.68")
Distance AccuracyAbsolute accuracy Whichever is the larger one of ±0.3mm or ±0.3%
of designated distance
Repeatability Whichever the larger one of ±0.2mm or ±0.1%
of designated distance
Perpendicularity ±0.5mm/500mm
Waste Ink Tank Bottle type (2 liters) with sensor
Media SizeSize 700mm(27.5")×600mm(23.6")
Thickness 50mm(1.96") or less
weight 10kg (22 lbs) or less
Media Set Device Flatbed with vacuum table
UV Device Equipped with UV lamp
Interface IEEE1394/IEEE1284
Applicable standard VCCI class A, CE Marking, CB Report, UL, RoHS Direct
Power Requirement Printer main unit・UV Device : Single-Phase 200V~240V
Power Consumption 4.0kVA or less (Main unit 0.5kVA, UV Device 1.8kVA, Heater 1kVA, blower 0.7 kVA)
Temperature 15 to 30°C (59 to 86 °F)
Humidity 35 to 65% Rh
Accuracy guarantee temperature 18 to 25 °C(64 to 77 °F)
Temperature gradient ±10 °C (50 °F)/h or less
Dust Equivalent to normal office level
Wight 420kg (926 lbs) or less (incl. UV power supply)
Outside Dimensions
2,440mm(96")×1,570mm(61.9")×1,370mm(54") or less
(incl. UV power supply)

*Exclusive RIP included as standard, compatible with EPS, PS, TIFF, JPEG and BMP file formats.
*Indicated values show the degree of mechanical precision.
At the time of shipment, adjustments are made to optimize visual quality.
*Inks would not be cured when printing speed is faster than that of draft mode.

	Inks and substrates
·Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
·Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.
Safety notice
You are dealing with UV light sources that may harm your health.
Please follow below guidelines strictly:
・Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
・Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
・ In addition, please read the instructions and guidelines of the manual carefully and follow those.