Specifications

HOME  >>  Product Lineup  >>  UJF-3042HG  >>  Specifications

Specifications

UJF-3042HG
Print head On-demand piezo print head
Resolution 720×600 dpi, 1,440×1,200 dpi
UV inkKind LH-100 (C/M/Y/K/W/Cl)
LF-200 (C/M/Y/K/W)
LF-140(C/M/Y/K/Lc/Lm/W)
Capacity 220 ml ink cartridge / 600 ml ink container
Inkjet primer PR-100
(220 ml ink cartridge / 600 ml ink container)
Max. print size Width:300 mm (11.8")  Length:420 mm (16.5")
Media sizesMax. size Width:364 mm (14.3")  Length:463 mm (16.2")
Thickness Up to 150 mm (5.9")
Weight Up to 5 kg (11.0 lbs)
UV technology UV LED unit
Interface USB2.0
Power requirements AC100V – 240V ± 10 % / below 0.5 kVA
Dimensions (W×D×H) / Weight 1,200 mm × 970 mm × 770 mm / 130 kg (47.2 " x 38.1 " x 30.3 " / 286.6 lbs)
  • All trademarks or registered trademarks are the property of their respective owners.
  • Specifications are subject to change without notice.
  • Some of the screens and printing samples in this website are artificial renderings.
  • Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

	Inks and substrates
·Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
·Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice
You are dealing with UV light sources that may harm your health.
Please follow below guidelines strictly:
・Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
・Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
・ In addition, please read the instructions and guidelines of the manual carefully and follow those.


▲ PAGETOP