Specifications

HOME  >>  Product Lineup  >>  UJF-3042FX  >>  Specifications

Specifications

UJF-3042FX
Head On-demand Piezo head
Print resolution 720 × 600 dpi, 1,440 × 1200 dpi
Ink Hard UV curable ink : LH-100, LF-140, LF-200
Ink capacity 220 ml / cartridge
Maximum print width Width : 300 mm (11.8 "), Length : 420 mm (16.5 ")
MediaWidth Width : 364 mm (14.3 "), Length : 463 mm (18.2 ")
Thickness Max. 50 mm (1.97 ")
Weight Less than 5 kg (11 lbs)
Set device Air suction by vacuum
UV device Equipped with UV Light Emitting Diodes
Interface USB 2.0
Applicable standard VCCI class A, FCC class A, UL, RoHS Directive, CE Marking
Power specifications AC 100 - 240 V (Automated voltage conversion)
Power consumption Less than 350 VA
Operational environmentTemperature 20 - 35 °C (68 - 95 °F)
Humidity 35 - 65 % Rh
Dust Equivalent to normal office level
Weight Approx. 113kg (249.1 lbs.)
Dimensions (W x D x H) 1,200 mm x 1,090 mm x 770 mm (47.2 " x 42.9 " x 30.3 ")
  • All trademarks or registered trademarks are the property of their respective owners.
  • Specifications are subject to change without notice.
  • Some of the screens and printing samples in this website are artificial renderings.
  • Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

	Inks and substrates
·Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
·Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice
You are dealing with UV light sources that may harm your health.
Please follow below guidelines strictly:
・Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
・Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
・ In addition, please read the instructions and guidelines of the manual carefully and follow those.


▲ PAGETOP