Specifications

HOME  >>  Product Lineup  >>  TS3-1600  >>  Specifications

Specifications

TS3-1600
Head On-demand Piezo head (180nozzles x 8 lines) x1 head
Maximum print width 1610mm (63.3")
Printing resolution 540, 720, 1440dpi
Printing mode
(scan x feed)
540 x 720dpi, 540 x 900dpi, 540 x 1080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1080dpi, 720 x 1440dpi
1440 x 1440dpi
InkKind Exclusive dye sublimation ink: Sb53
Capacity 4-color mode:440cc cartridge x 2/color, 880cc/color or 2L pack x 2/color, 4L/color
6-color mode:440cc cartridge x 1/color, 440cc/color or 2L pack x 1/color, 2L/color
MediaSize 1620mm (63.9")
Roll weight less than 25kg (55.1lbs.)
Printing surface Face out
Roll inside diameter 2 inch or 3 inch
Media cutting Cutting on Y direction by cutter at the head
Media heater Triple stage intelligent heater (Pre/Print/Post)
Media Take-up device Roll take-up device (standard), inside/outside selectable
Interface USB2.0
Applicable standards VCCI Class A,FCC Class A, UL 60950
CE Marking (EMC Directive, Low Voltage Directive), CB Report
Power AC100~120V±10%, AC220~240V±10%, 50/60Hz±1Hz
Power consumption Less than 1440 VA
Operation environments Usable temperature:20°C to 35°C,
Humidity:35% to 65%Rh, Not condensing
Dimensions (W x D x H) 2538 x 739 x 1424mm
(99.9" x 29.1" x 56.1")
Weight 160kg (353lbs.)
  • Some of the samples in this website are artificial renderings.
  • Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
  • The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
  • Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to the other due to slight individual differences.

▲ PAGETOP