Specifications

HOME  >>  Product Lineup  >>  TS5-1600AMF  >>  Specifications

Specifications

TS5-1600AMF
Print Head On-demand Piezo head (Array of 4 staggered print heads)
Maximum printing width 1,620mm (63.7")
Printing resolution 540, 720, 1,440 dpi
Printing mode
(Scan x Feed)
720 x 540 dpi: Bi-directional & uni-directional
540 x 900 dpi: Bi-directional & uni-directional
540 or 720 x 720 dpi: Bi-directional & uni-directional
540 or 720 x 1,080 dpi: Bi-directional & uni-directional
720 x 1,440 dpi: Bi-directional & uni-directional
1,440 x 1,440 dpi: Bi-directional & uni-directional
InkKind Dye sublimation ink: Sb53
Supply Automatic change of double ink cartridges
Capacity 4 color mode: 440 cc cartridge x 4/color, 1760 cc/color
6 color mode: 440 cc cartridge x 2/color, 880 cc/color
(M,BL:440 cc cartridge x 4/color, 1760 cc/color)
2 liter ink pack can be used with MBIS
Media specificationKind Transfer papers
Size Maximum 1,630 mm (64.1")
Minimum 297 mm (11.7")
Thickness less than 1.0 mm
Roll weight less than 38 kg(83lbs.)
Printing surface Face out
Roll diameter Outside: less than 250 mm(9.8") Inside: 76 mm(3")
Media cutting Cutting in Y direction by cutter at the head
Media heater 3 way intelligent heater (PRE / PRINT / POST)
Media take-up device Roll take-up device (standard), inside / outside selectable
Nozzle checking unit (NCU) Laser system (Class 1 or below)
Print gap 1.5 mm to 7mm, step-less & user setting,
(automatic detection of media thickness)
Interface USB 2.0
Applicable standard VCCI Class A, FCC Class A, UL 60950,
CE Marking (EMC Directive, Low Voltage Directive) , CB Report, RoHS
Power source specification AC 200V to 240V ±10%, 50/60 Hz ± 1Hz 15 A or below
Power consumption 3,600 VA or below
Operating environment Usable temperature: 20°C to 35°C, Humidity: 35 % to 65%Rh,
Not condensing
Outside dimension(W) x (D) x (H) 3,120 x 850 x 1,540 mm
(122.9" x 33.5" x 60.7")
Weight less than 398kg (877lbs.)
  • Some of the samples in this website are artificial renderings.
  • Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
  • The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
  • Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to the other due to slight individual differences.

▲   PAGETOP