Feature

HOME  >>  Product Lineup  >>  JFXplus Series  >>  Feature

High Speed

As standard, JFX plus series is now equipped with a post-curing unit that cures the print after its first exposure by UV LEDs thus enabling nearly double the print speed as previous models. Print service providers can now cater to their clients' needs for fast turnarounds, quick changes and short run orders while at the same time increasing productivity and efficiency.


print speeds

*The speed charts above are in conditions of printing with CMYK.
Print speed varies according to substrate.


[Post-curing unit] High speed UV ink curing

Post-curing unit
Post-curing unit
Max print size 1,600mm×2,700mm with post-curing unit

Please note that when using the post-curing unit for high speed printing and curing, maximum print size is shortened by 150 mm (front), 250 mm (back) and 400 mm (total). The printer automatically switches sizes when post-curing is selected. Therefore please make sure to adhere to the maximum print sizes according to your selected print and curing mode.
(The image on the left shows the maximum print size without post-curing)

Existing JFX-1631/1615 printers

JFX-1631/1615 printers can be upgraded to JFX plus series by installing the post-curing optionally.Please contact your service engineer for further details.

High Accuracy

IMS for highly detailed and accurate prints

The new head positioning mechanism uses high resolution linear scale for fine step accuracy of dot placement.This results in far fewer banding artifacts and even the possibility to print legible 3pt characters.


Examples of dot placement

High resolution of 1200 x 1200 dpi and variable drops


High image quality is achieved by utilizing a resolution of up to 1200 x 1200 dpi and variable dot sizes. Even printing in 4-color mode realizes a non-grainy print, thus prints show smooth gradations and highly detailed images.


1,200×1,200 dpi
Variable dot technology

Ink variation


Different UV inks cater to your requirements


LH-100 UVインク

LH-100(CMYK+W+CL)

[Features] High scratch and chemical resistance, superior coloration.
[Main Appli-cations] Flat surfaces, acrylic and aluminum compound boards, styrene boards, CCNB etc.


LF-200 UVインク

LF-140 / 6 Color (K,C,M,Y,Lc,Lm) + W * LH-100 clear ink can be used together.

[Features]Gradation reproducibility is improvedwith light color inks.Ink flexibility gives the printed media bendability.
[Main Appli-cations] Soft plastic, leather, panel, POP and package


LF-140 UVインク

LF-200(CMYK+W)

[Features] 200% elasticity, suitable for embossing and other post-processing tasks.
[Main Appli-cations] Flat and uneven surfaces, vehicle wraps, vinyl chloride film, packaging, banners etc


* As ink flexibility of LF-200 ink and LF-140 ink vary according to the substrate, please verify your substrate in advance.


白インク

More vivid images with white ink

*Sample print on transparent acrylic



Pallid, sallow image due to colored/transparent substrate.



Original vivid image colors are displayed due to white ink layer underneath the image.



クリアインク

Clear ink adds more value to your prints

Glossy or matte finishing varnish with clear ink* realizes astounding and eye-catching effects on your prints. Depending on your design, you can add protective coating to protect surface or spot coating for design accents.
* Clear ink can only be used with LH-100 ink


JFXplus Series

Haptic effects with multi-layered print

By printing several layers of ink and/or gloss, your images will not only look more enticing but also will have a haptic feel that will satisfy your clients.

Hybrid


Print on rigid boards and roll media with the same machine

While printing on rigid substrates up to 50 mm thickness is standard, JFX plus also answers the demand of print service providers for hybrid printing on roll media. An optional roll unit is available that enhances productivity and efficiency by accommodating unattended printing of several or different jobs* enabling fast turnaround times.
* Each job is limited by the max. print size of JFX plus.

Ecology


JFXplus Series

Environmentally friendly printing

Almost no VOCs are generated by UV curing print. In addition, diodes that are used for Mimaki's UV LED system feature a long lifetime and are using considerably less power than conventional UV lamps. Furthermore by using Mimaki's Eco-cartridge system, waste is reduced as the ink pack inside of the cartridge casing needs to be replaced.
* The post-curing unit employs a fluorescent UV tube lamp.


お問い合わせフォーム

For further information, please contact us through our inquiry form.

▲ PAGETOP